Modeling Light; Auto Focus Assist Beam - Godox V1 C Instruction Manual

Light
Modeling
•
If the camera has a depth-of-field preview button, pressing it will fire the flash continuously
for 1 second. This is called modeling flash. It enables you to see the shadow effects on the
subject and the lighting balance. You can fire the modeling flash during wireless or normal
flash shooting.
•

Auto Focus Assist Beam

•
In poorly-lit or low-contrast shooting environments, the built-in auto focus assist beam will
automatically light on to make it easier for autofocus. The beam will light up only when
autofocus is difficult and get out as soon as the autofocus becomes correct. If you want to
turn off the auto focus assist beam, set the "AF" to "OFF" on the C.Fn settings.
Periphery
AF Assist function in Canon system should work with all DSLR's made after
•
2012 with the exception of mirrorless cameras such as: EOS R, RP, M5
AF Assist function in
•
with the exception of mirrorless cameras such as: Nikon Z6 and Z7.
AF Assist function in
•
AF Assist function in Fujifilm
•
GFX50S, GFX50R.
AF Assist function in Micro 4/3 is not available.
•
Modeling light function is not available in all V1 versions and may
be limited by camera.
To avoid overheating and deteriorating the flash head, do not fire the
modeling flash for more than 10 consecutive times. If you fire the
modeling flash 10 consecutive times, allow at least 10 minutes' break
for the camera flash.
AF Assist function is not available in all V1 versions and may be
limited by camera.
Center
Nikon system
Sony system
should work with all DSLR
can be used with
can be used with
system
0.6~10m
0.6~5m
or other
including all SLR
(
: α9, α7III, α7RIII, α77II, α99II.
: X-Pro2, X-T20, X-T2, X-T1,
.
)
31