Flash Modes; Ttl: Automatic - Godox V1 C Instruction Manual

Flash Modes

V1 flash can be used in one of three modes:
Automatic
1.
Press <MODE> Mode Selection Button and three flash modes will display on the LCD panel
one by one with each pressing.

TTL: Automatic

In TTL mode, the camera and the flash will work together to calculate the correct exposure for
the subject and the background. In this mode, multiple TTL functions are available: FEC, FEB,
FEL, HSS, second curtain sync, modeling flash, control with the camera's menu screen.
Press < MODE > Mode Selection Button to enter E-TTL mode. The LCD panel will display.
1. Press the camera release button halfway to focus. The aperture and effective flash
range will be displayed in the viewfinder.
2. When the shutter button is fully pressed, the flash will fire a preflash that the camera
will use to calculate exposure and flashoutput the instant before the photo is taken.
•
•
FEC: Flash Exposure Compensation
With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in situations
where minor adjusting of the TTL system is needed based on the environment.
(TTL) 2.
To ensure stable and
modes light and camera must be compatible. For example: Canon
camera should be matched with corresponding V1C model, Sony
camera requires V1S, etc.
Flash is not able to work with TTL/HSS activated when used with third
party triggers.
Manual
(M)
reliable
automatic flash light metering in TTL/HSS
1. Press < +/- > button and flash exposure
compensation amount will be highlighted on
the LCD panel.
2. Set the flash exposure compensation amount.
Turn the Select Dial to set the amount.
"0.3"means 1/3 step,
•
• "0.7"means 2/3 step.
To cancel the flash exposure compensation,
set the amount to "+0".
Stroboscopic
3.
(Multi)
14