Attaching To A Camera; Power Management; Flash Mode-E-Ttl Autoflash - Godox V860III-C User Manual

Attaching to a Camera

Attach the Camera Flash
Rotate the hotshoe fixing
buckle to the left and insert
the camera flash into the
camera's hotshoe.

Power Management

Use ON/OFF Power Switch to power the flash unit on or off. Turn off it will not be used
for an extended period of time. Setting as transmitter flash, it will turn the power off
automatically after a certain period (approx. 90 seconds) od idle use. Pressing the
camera shutter halfway or pressing any flash button will wake up the flash unit. Setting
as a receiver flash, it will enter sleep mode after a certain period (adjustable, 60 minutes
by default) of idle use. Pressing any flash button will wake it up.
Disabling Auto Power Off function is recommended when the flash is used off
camera. (C.Fn-STBY)
Receiver Auto Power Off Timer is set to 60 minutes by default. Another option "30
minutes" is available (C.Fn-RX STBY)
Flash Mode—E-TTL AutoFlash
This flash has three flash modes: E-TTL, Manual (M), and Multi (Stroboscopic). In E-TTL
mode, the camera and the flash will work together to calculate the correct exposure for
the subject and the background. In this mode, multiple TTL functions are available: FEC,
FEB, FEL, HSS, second curtain sync, modeling flash, control with the camera's menu
screen.
*Press <MODE> Mode Selection Button and three flash modes will display on the LCD
panel one by one with each pressing.
Secure the Camera Flash
Rotate the hotshoe fixing
buckle to the right until it
locks up.
13
Detach the Camera Flash
Press the button and
rotate the hotshoe fixing
buckle to the left until it is
loosened.