Connection To Communication Base Unit And Terminal Board Unit - Toshiba TOSDIC-CIE DS Installation And Wiring Manual

Connection to Communication Base Unit and Terminal Board Unit

To connect the I/O bus cable to the I/O bus connector of the communication base unit or terminal
board unit, follow the next procedure.
1) Connect the units from the communication base unit to the terminal board unit at the
termination with the I/O bus cable.
2) Install the terminating connector FSTM1 (attachment of USCB1) to the I/O bus connector of
the terminal board unit at the termination.
Connection of external line
Take the external line from the left side of the terminal board unit and connect it to the external
line terminal board.
External terminal
board
Terminal board unit
Figure 2.43 Connection of I/O Bus Cable
I/O bus connector
1) Connect the units with
the I/O bus cable.
2) Install the terminating
connector FSTM1 to the end
stage of the I/O bus cable.
Terminating connector FSTM1
2. Wiring of PCS-DS51
I/O bus cable
Fix it with screws of
the connector.
Fix it with screws of
the connector.
69