Redundant Configuration And Network Connection - Toshiba TOSDIC-CIE DS Function Manual

1. Outline

Redundant configuration and network connection

OIS-DS/SMART can build the redundant system.
SVR function and PLCS function become a stand-by redundant type,when this is the redundancy.
Maximum 8 OIS functions can be used in the system.
OIS-DS/SMART
Redundant configuration
OIS function
SVR function
PLCS function
The number of maximum stations which can be used in the system is shown in Table 1.1.
Station type
OIS + SVR + PLCS function
OIS function
Necessary Ethernet type is shown in Table 1.2.
LAN A/B for controllers
LAN for information
LAN for redundancy
LAN for PLC
2
OIS function
SVR function
PLCS function
PLC
Figure 1.2 Redundant configuration
Table 1.1 System Configuration
Table 1.2 Necessary Ethernet type
The totals of OIS, OIS-DS/SMART and controllers are
more than two units.
Printer is connected.
LAN for redundant configuration of OIS-DS/SMART.
LAN A for controllers or special
LAN for redundancy/ LAN for Information
...
OIS function
LAN for controllers
Number of Station
One or one set of redundancy.
Maximum 8 OIS functions can be used in the
system
OIS function