Connection Between Ois-Ds And Its Peripheral Devices; Connecting To The Ethernet Control And Information Lan - Toshiba TOSDIC-CIE DS Installation And Wiring Manual

Connection between OIS-DS and its Peripheral Devices

Connecting methods to the Ethernet LAN and OIS-DS peripheral devices are described below.

Connecting to the Ethernet Control and Information LAN

OIS-DS had three Ethernet LAN's adapter. Network configuration of OIS-DS is shown in Figure
3.2.
Backside View of OIS-DS
Ethernet Information LAN
(1) Using the network cable appropriate for the Ethernet Information LAN, connect one end of
the network cable to the connector of the network hub.
(2) Connect the other end of the cable to the connector shown in Figure 3.3.
(3) Ensure both connections are secure.
Twisted Pair Cables with
RJ-45 Connectors at Both Ends
Figure 3.2 Network Configuration of OIS-DS
3. Connection of OIS-DS and SVR-DS
Ethernet Hub for
Control LAN B
Ethernet Hub for
Control LAN A
Ethernet Hub for
Information LAN
79