Connection Of Server Station; Connecting To The Ethernet Control And Information Lan - Toshiba TOSDIC-CIE DS Installation And Wiring Manual

3. Connection of OIS-DS and SVR-DS

Connection of Server Station

Connecting method to the Ethernet LAN and redundant system configuration are described
below.
"SVR-DS" uses four channels of the network interface.
The built-in Ethernet interface is used for the single Ethernet Information LAN.
The expansion Ethernet interfaces are used for the redundant Ethernet control LAN and the
tracking path of the redundant station.

Connecting to the Ethernet Control and Information LAN

SVR-DS had four Ethernet LAN's adapters. Network configuration of SVR-DS is shown in
Figure 3.11.
SVR-DS Station A
Ethernet Control
LAN B
86
Crossed Tracking Cable for Redundant Configuration
Ethernet Control LAN A
Ethernet Hubs
Ethernet Information LAN
Figure 3.11 Network Configuration of SVR-DS
SVR-DS Station B