Unpacking Work - Toshiba TOSDIC-CIE DS Installation And Wiring Manual

6) When the equipment as packed is stored, it should be stored in a room with less humidity and
the following storing conditions should be satisfied.

Unpacking Work

The unpacking work should be done near the installation place with sufficient space and height,
taking care not to damage the equipment.
To remove the nails, use the nail puller and be careful not to give impact.
The checking with the packing list should be done for each package.
Up/down direction is indicated
Object vulnerable
to impact
No wetting
Figure 1.4 Example of Handling Marks
Table 1.3 Storing Conditions
Item
Temperature
Humidity
Lifting position is indicated
Center of gravity is indicated.
Condition
-20 to 75 ° C
10-90% RH
(No dewing condensation)
1. System Configuration
9