Base Unit - Toshiba TOSDIC-CIE DS Hardware Operation Manual

Base unit

The base unit is a component to mount the base card and module to the housing. Fig. 2.1 is
the external view of the base unit.
Model name
Mounting type
Applicable module
Number of modules that
can be mounted
Power connector
Outside dimension
Weight
Serial bus terminal block
SBIF3 mounting
connector
(primary)
SBIF3 mounting
connector
(secondary)
SBIF3 mounting
connector
(primary)
SBIF3 mounting
connector
(secondary)
Unit address
setting switch
effective range
'1' to 'F'
24V system power supply cable
connector (SYS)
MV power supply 24V cable connector (MV)
Table 2.2
Item
UIOU12
Fixed to the housing with M4 screws (at 4 locations)
SBIF3, SLP05, SLP06
SBIF3 4 units (redundant, 2 pairs)
SLP05 or SLP06 16 units (redundant, 8 pairs)
For 24V system power supply: 1 piece
For 24V MV power supply: 1 piece
(If no SLP05 is installed in the unit, no MV power supply is required.)
480W × 289H × 140Dmm
500g or less (single unit)
Fig. 2.1 ULCU12 external view
Base unit specification
Specification
By serial I/O unit
By serial I/O unit
2. System component
SLP05/SLP06 Module
mounting connector
(Left: primary
Right: secondary)
Marshaling unit VTBUX85C/P
cable connector
7