Overview
When a supervisory condition is detected by the FACP, the panel does the following to indicate the
How the FACP
Indicates the
presence of the condition.
Presence of a
•
Supervisory
Condition
•
•
The yellow LED labeled "SUPERVISORY" flashes
The tone-alert (piezo buzzer) sounds steady
The LCD on the interface panel indicates a supervisory condition. There are six ways that the
Flexible User Interface can display a supervisory condition. Refer to
Chapter 2 for descriptions of the six display modes. An example is shown below:
Figure 4-1. First-5-Last Display for Supervisory Conditions
firealarmresources.com
4-2
Need help?
Do you have a question about the InfoAlarm 4100U and is the answer not in the manual?