If The Trouble Doesn't Clear; Overview; System Reset Key - Simplex InfoAlarm 4100U Operator's Manual

Hide thumbs Also See for InfoAlarm 4100U:

Table of Contents

If the Trouble Doesn't Clear

On global acknowledge systems, trouble points do not usually require acknowledgment of the

cleared condition. If the system does not clear, read the display. The information on the display will

indicate the circuit or nature of the fault. Some faults interfere with the protection provided by the

Fire Alarm system. If the source of the trouble cannot be located, call an authorized Simplex

representative to repair the system.

Some troubles latch until they are reset manually, or are reset by pressing the SYSTEM RESET

key. Try pressing the SYSTEM RESET key if the trouble is any one of the following:

•

If pressing the SYSTEM RESET key does not clear the trouble, or if the trouble toggles (clears and

then reappears), the indicated circuit should be checked by a qualified service technician.

Class A initiating device circuit trouble

City Circuit trouble

24 Point I/O trouble

firealarmresources.com

3-5

Table of Contents

Do you have a question about the InfoAlarm 4100U and is the answer not in the manual?

Infoalarm 4100es