Page Additional Floors; Listen To What Is Being Played Using The Local Speaker; Silencing The Audio System; Resetting The Audio System - Simplex InfoAlarm 4100U Operator's Manual

Single Channel Audio Operation,
Page Additional While an evacuation is in progress, you can page additional floors. To do this, follow these steps.
Floors
1.
2.
Listen to What is Press the button labeled "Local Speaker" to hear what is being played at that time. The LED asso-
Being Played Using
ciated with this button illuminates when the button is pressed to indicate the function is active.
the Local Speaker
Note:
Press the Alarm Silence button on the front panel to silence the audio system. When you do this,
Silencing the Audio
System
the speakers remain on, but play nothing.
Resetting the Audio Press the System Reset button to reset the audio system. When you do this, the following occurs.
System
•
•
•
continued
Press the buttons associated with the additional floors prior to keying the microphone. The
LEDs associated with these floors turn ON.
Key the microphone and wait for the Ready to Talk LED to illuminate. Once this LED
illuminates, speak into the microphone. The message is played on the additional floors.
If the user picks up the local phone or keys the microphone while the local speaker is
active, the speaker shuts off to prevent feedback. The local speaker turns back on when
the page is complete.
All speakers and associated LEDs turn OFF.
The local speaker turns off.
Any paging that is in progress is canceled.
firealarmresources.com
8-4