ITech IT8511A Manual page 48

48H Setting list file name.
49H Reading list file name.
4AH Selection the memory space mode for storing list steps.
4BH Reading the memory space mode for storing list steps.
4CH Save list file in appointed area.
4DH Get the list file from the appointed area.
4EH Setting min voltage value in battery testing mode.
4FH Reading min voltage value in battery testing mode
50H Setting timer value of FOR LOAD ON
51H Reading timer value of FOR LOAD ON
52H Disable/Enable timer of FOR LOAD ON
53H Reading timer state of FOR LOAD ON
54H Setting communication address
55H Enable/Disable LOCAL control mode.
56H Enable/Disable remote sense mode.
57H Reading the state of remote sense mode.
58H Selecting trigger source.
59H Reading trigger source.
5AH Sending a trigger signal to trigging the electronic load.
5BH Saving user's setting value in appointed memory area for recall.
5CH Recall user's setting value in appointed memory area.
5DH Selecting FIXED/SHORT/TRAN/LIST/BATTERY function mode.
5EH Getting function mode state.
5FH Reading input voltage, current, power and relative state
60H Enter the calibration mode
61H Getting the calibration mode state.
62H Calibrate voltage value.
63H Sending the actual input voltage to calibration program.
64H Calibrate current value.
65H Sending the actual input current to calibration program.
66H Store the calibration data to EEPROM.
67H Setting calibration information.
68H Reading calibration information.
69H Restore the factory default calibration data.
6AH Reading product's model, series number and version information.
6BH Reading the information of bar code.
6CH Setting information of bar code
12H The return information of command operation in electronic load.
48