ITech IT8511A Manual page 10

MENU
CONFIG
INITIAL CONFIG 초기의
CONFIG
POWER-ON RECALL
전원 -ON 복원
ON
OFF<DEFAULT>
INPUT RECALL
ON
OFF<DEFAULT>
KEY SOUND SET
ON<DEFAULT>
OFF
KNOB LOCK SET
ON
OFF<DEFAULT>
REMOTE SENSE
ON
OFF<DEFAULT>
TRIGGER SOURCE
IMMEDIATE<DEF>
EXTERNAL
BUS
BAUDRATE SET
4800<DEFAULT>
9600
19200
38400
COMM. PARITY SET
NONE<DEFAULT>
EVEN
ODD
ADDRESS SET
Return to the factory default setup value. 공장 설정
설정값에 돌아옵니다.
Setting Power-on state of Load. 부하의 전원을
켠상태를 설정하는 것.
When users turn on the electronic load; the
electronic load setup value will keep the state of last
time when users turn off the electronic load.
Disable this function.
Setup of the electronic load input state in Power on.
When users turn on the electronic load; the
electronic load input will keep the state of last time
when users turn off the electronic load.
When users turn on the electronic load, the
electronic load input will keep the state off.
Keypad sound setting.
Enable key sound.
Disable key sound.
Setup Rotary knob lock state.
Lock Rotary knob.
Unlock Rotary knob.
Setup voltage measurement Mode.
The electronic load will measure input voltage from
the remote sense connector.
The electronic load will measure input voltage from
the front panel connector.
Choosing the trigger signals source.
Trigger signals from
Trigger signals from the TRIG connector in the
rear panel.
Communication command trigger mode.
Setting baud rate.
Command parity setting.
Setting communication Flow mode
Shift
Trigger
+
key
10