ITech IT8511A Manual page 11

KEY LOCK SET
EXIT
SYSTTEM SET
MAX CURRENT SET
MAX POWER SET
MAX VOLTAGE SET
EXIT
LIST SET
MODE SET
FIXED MODE
LIST MODE
CALL LIST FILE
EDIT LIST FILE
LIST STORE MODE
8 X 120 STEPS
4 X 250 STEPS
2 X 500 STEPS
1 X 1000 STEPS
EXIT
LOAD ON TIMER
TIMER STATE
ON
OFF<DEFAULT>
TIMER SET
EXIT
EXIT
General Information 일반 정보
Document Orientation 서류정위
This manual describes the operation of the IT Model 8511, 8512 DC Electronic Loads.
이 매뉴얼은 모델 IT8511,8512 직류 전자 부하 동작의 특징을 말한다.
Setting keypad password.
ENTER
Press
function.
Setup the Maximum current.
Setup the Maximum Power.
Setup the Maximum Voltage.
Setting operation mode.
Fixed mode.
Choosing List mode.
Recall list operation file.
Edit list operation file.
Users can choose 4 kind of memory space to save the list
file.
Total 8 files and each file have120 list steps.
Total 4 files and each file have250 list steps.
Total 2 files and each file have500 list steps.
Total 1 file and each file have1000 list steps.
Setting LOAD ON timer state
When users choose the timer state ON, and then
turn on the electronic load input, the LOAD ON
TIMER will start working, and when the LOAD
ON TIMER is reach the setup time, the electronic
load input will turn off automatically,.
Setting time of LOAD ON timer,
directly to disable the key lock
11