Daikin altherma 3 M Service Manual page 127

To install the backup heater thermal protector
EBLA09~16DA + EDLA09~16DA
Daikin Altherma 3 M
ESIE20-06A – 2021.03
a Backup heater thermal protector sensor
b Backup heater
4 Loosen and remove the 2 screws that fix the backup heater thermal protector
bracket to the switch box.
b c
c
a Screw
b Backup heater thermal protector bracket
c Screw
d Backup heater thermal protector
5 Loosen and remove the 2 screws that fix the backup heater thermal protector
to the bracket.
6 Disconnect the wires from the backup heater thermal protector terminals.
7 Remove the backup heater thermal protector and sensor from the unit.
8 To install the
4
procedures" [ 126].
1 Route the backup heater thermal protector sensor and wiring through the
grommet of the switch box.
2 Insert the backup heater thermal protector sensor in the backup heater.
a b
a
a d
backup heater thermal
3 Components
|
protector, see "Repair
Service manual
127