Repairs; Sending For Repair - BRAND Transferpette electronic Operating Manual

Pipette shaft soft (complete)
Pipette shafts complete for Transferpette® electronic , single channel, soft shaft

14 Repairs

14.1 Sending for repair

Transporting of hazardous materials without a permit is a violation of federal law.
Clean the instrument thoroughly and decontaminate!
•
When returning products, please enclose a general description of the type of malfunction and
the media used. If information regarding media used is missing, the instrument cannot be re-
paired.
•
Only send the device without a battery installed.
•
Shipment is at the risk and the cost of the sender.
Outside USA and Canada
Complete the "Declaration on Absence of Health Hazards" and send the instrument to the manufac-
turer or supplier. Ask your supplier or manufacturer for the form. The form can also be downloaded
from www.brand.de.
Within USA and Canada
Please clarify the requirements for the return delivery with BrandTech Scientific, Inc before sending
the instrument in for service.
Return only cleaned and decontaminated instruments to the address provided with the Return Autho-
rization Number. Place the Return Authorization number so that it is clearly visible on the outside of
the package.
Transferpette® electronic 997209
Volume
10–200 µl
50–1000 µl
NOTICE
14 Repairs
Order No.
705543
705545
Operating manual
79