Revpip Mode - BRAND Transferpette electronic Operating Manual

5 Pipetting programs
f.
Hold
pressed
g.
1 x

5.3 revPIP mode

Program especially for pipetting liquids with high viscosity, high vapor pressure, or foaming media.
Volume and speed setting, see Set volume, p. 51 and Set the aspiration and dispensing speed, p. 52.
a.
3 x
b.
c.
1 x
58
Operating manual
f.
Dispense liquid in PIPmix mode: Pressing and holding
the pipetting key causes the liquid to be alternately dis-
pensed and aspirated. The display alternately shows
the arrow symbol for aspiration or dispensing as well as
the number of cycles.
g.
End pipetting: Pressing the pipetting key once dis-
penses the liquid and triggers the blow-out. After dis-
pensing the residual liquid (blow-out), the display
jumps back to the set mode (start position).
The display shows a maximum of 19 cycles.
a.
Call up menu selection: Pressing the menu key three
times takes you to the program selection.
ð
'Mode' flashes.
b.
set revPIP mode: Use one of the arrow keys to scroll
through the modes until 'revPIP' appears.
ð
'Mode' continues to flash.
c.
Confirm revPIP mode: Press 'Enter' key.
ð
The display now shows 'blo' for blow-out.
NOTICE
Transferpette® electronic 997209