Preventing Test Port Connector Damage; Observe Proper Shutdown Procedures - Keysight Technologies PNA Series Installation And Quick Start Manual
Network analyzers
Hide thumbs
Also See for PNA Series:
- Installation manual (96 pages) ,
- Installation and getting started manual (41 pages)
Table of Contents
Advertisement
In This Guide
Operating Precautions
Figure 1
Example Label Showing Damage Level for Each Port and Connector
Preventing Test Port Connector Damage
Proper connector care and connection techniques are critical for accurate and
repeatable measurements. The following table contains for tips on connector
care.
For more information on the proper use and maintenance of connectors, see
https://rfmw.em.keysight.com/wireless/helpfiles/N52xxB/Tutorials/Connect
or_Care.htm.
Observe Proper Shutdown Procedures
To turn the PNA OFF, BRIEFLY press the front panel On/Standby switch. The
PNA will then begin to shutdown.
The On/Standby indicator changes from green to yellow when power is Off.
8
Installation Note E8356-90001
Advertisement
Table of Contents
