Table of Contents
Advertisement
2 Review Safety Requirements
2. 2. 3 General Safety Notices
If these products are not used as specified, the protection
provided by the equipment could be impaired.
These products must be used in a normal condition
(in which all means for protection are intact) only.
This is a Safety Protection Class I Product (provided with a
protective earthing ground incorporated in the power cord). The
Mains plug shall only be inserted in a socket outlet provided with a
protective earth contact. Any interruption of the protective
conductor inside or outside of the product is likely to make the
product dangerous. Intentional interruption is prohibited.
The Keysight S9106AC-2IF and S9106AC-4UP 5G FR1 Multi-port
Transceiver Solutions are designed for use in Installation
Category II and Pollution Degree 2, per IEC 61010 Second Edition
and 664 respectively.
The Keysight S9106AC-2IF and S9106AC-4UP 5G FR1 Multi-port
Transceiver Solutions are designed for indoor use only and does
not support hot-swapping of modules; for example, inserting and
removing modules with the chassis powered up. Before installing
modules in or removing modules from the chassis, power down
the chassis, but leave the power cord connected to the AC Mains
because it serves as a ground and helps protect the chassis and
modules from electrostatic damage.
Keysight S9106AC-2IF and S9106AC-4UP 5G FR1 Multi-port Transceiver Solutions, Startup Guide
5
Advertisement
Table of Contents
