Table of Contents
Advertisement
5. Set the RF Input to 3 GHz; this is RF Transceiver .380 - 6 GHz,
located on the Rugged Front Panel.
6. Set the RF Output to 3 GHz; this is RF Transceiver .380 - 6 GHz,
located on the Rugged Front Panel.
Keysight S9106AC-2IF and S9106AC-4UP 5G FR1 Multi-port Transceiver Solutions, Startup Guide
a. Select Input/Output from the drop-down menu panel (top-right corner),
select Input tab,
select RF Input drop-down menu, and select RF Input.
b. Select Frequency from the drop-down menu panel (top-right corner),
select Center Frequency entry box, and set it to 3 GHz.
c. Leave all of the other RF Input settings in their preset state.
a. Select Input/Output from the drop-down menu panel (top-right corner),
select RF Source tab,
select RF Output Port drop-down menu, and select RF Output.
b. Set RF Power to –10 dBm, Frequency to 3 GHz, and RF Output to On.
6 Verify Operation
RF In ➁
RF Out ➀
55
Advertisement
Table of Contents
