Table of Contents
Advertisement
2 Review Safety Requirements
2. 9. 1 Before Applying Power
Verify that all safety precautions are taken. Make all connections to the unit before
applying power. Note the external markings described under
Symbols on page 17.
2. 9. 2 Ground the Instrument
2. 9. 3 Power Strip Warning
2. 9. 4 Do Not Use Extension Cords
2. 9. 5 Do Not Use Converters or Adapters
12
Keysight S9106AC-2IF and S9106AC-4UP 5G FR1 Multi-port Transceiver Solutions, Startup Guide
The Mains wiring and connectors shall be compatible with the
connector used in the premise electrical system. Failure to ensure
adequate earth grounding by not using the correct components
may cause product damage and serious injury.
These products must be used in a normal condition (all means for
protection are intact).
This is a Safety Protection Class I Product (provided with a
protective earthing ground incorporated in the power cord). The
mains plug shall only be inserted in a socket outlet provided with a
protective earth contact. Any interruption of the protective
conductor inside or outside of the product is likely to make the
product dangerous. Intentional interruption is prohibited.
DO NOT use a power strip which is not suitable for the installation.
These devices may not be sufficiently rated to carry the required
current and may become a safety hazard.
DO NOT use extension cords to power your equipment.
DO NOT use any converters or adapters.
Front and Rear Panel
Advertisement
Table of Contents
