Verify X-Apps Software Controls An S9106Ac-2If; Verify X-Apps Controls S9106Ac-2If Rf Ports At 3 Ghz - Keysight Technologies S9106AC-2IF Startup Manual

6 Verify Operation

6. 1 Verify X-Apps Software Controls an S9106AC-2IF

6. 1. 1 Verify X-Apps Controls S9106AC-2IF RF Ports at 3 GHz

1. On RF Transceiver 1, connect an RF loop-back cable from
located on the Rugged Front Panel.
This loop-back cable is not included with the S9106AC-2IF
5G FR1 Multi-port Transceiver.
46 Keysight S9106AC-2IF and S9106AC-4UP 5G FR1 Multi-port Transceiver Solutions, Startup Guide
This process must be repeated for each M9410A PXIe VXT
Vector Transceiver and its selected X-Apps software pair in the
system; the S9106AC-2IF 5G FR1 Multi-port Transceiver contains
two M9410A PXIe VXTs that are labelled on the
Rugged Front Panel as Transceiver 1 and Transceiver 2.
This process verifies operation of RF Transceiver .380 - 6 GHz,
RF Out ➀ RF In ➁
and
Use a cable with two adapters (or equivalent) such as:
one 5063-1530 RF Cable, SMA (m) to SMA (m), 152.4 mm (6.0 in) and
two 1250-1250 Adapters, SMA (f) to Type-N (m)
located on the Rugged Front Panel.
RF Out ➀ RF In ➁
to