Table of Contents
Advertisement
U5309A Front Panel Features
Front Panel Connectors
1
For the 2 channels version (U5309A-CH2 option)
2
For the 8 channels version (U5309A-CH8 option)
3
For modules delivered after April 2015. The driver automatically adjusts offset
accordingly.
Keysight U5309A Startup Guide
Connector
Type
TRG IN
MMCX
female
IN 1 to IN
SSMC
1
2
male
2
1 to 8
JTAG
Micro
USB
TRG OUT
MMCX
female
I/O 1, 2, 3
MMCX
female
CLK IN
MMCX
female
REF IN
MMCX
female
Note: It is recommended to first connect the SSMC end of the input cable and
tighten using the torque wrench (U1092A-WCK) before connecting the SMA
end, this minimizes strain on the connector. A 1 m SSMC to SMA cable is
available as an accessory (U1092A-CB3) A 1 m SSMC to BNC cable is also
available (U5300A-100).
Step 4: Install the Module
Description
External trigger signal input, 50 Ω
terminated.
Level range is ±5 V.
Analog signal input.
DC-coupled and 50 Ω terminated.
Maximum input voltage ±3.4 V DC
3
(or ±5 V DC)
.
Provides connection to the DPU for
use with the U5340A FPGA Devel-
opment Kit.
Trigger Out signal.
User configurable Input / Output sig-
nal.
3.3 V CMOS and TTL compatible.
External clock input.
AC coupled and 50 Ω terminated,
signal level: +5 to +15 dBm.
Please refer to datasheet for details.
External reference clock input,
AC coupled and 50 Ω terminated.
It can accept a 100 MHz signal from -
3 to +3 dBm.
17
Advertisement
Table of Contents
