Inseego Wavemaker PRO Installation Manual page 5

c. Screw the body of the gland to the FW2010e.
d. Connect the two parts of the sealing around the cable, then slide the sealing
into the gland body.
Sealing
e. Slide the clip and the sealing cap along the cable and screw the sealing cap
tightly to the gland body. The sealing cap will keep the PoE connection secure
and watertight.
Insert the other end of the cable into the PoE injector Data & Power Out port.
f.
Plug the PoE injector into an earthed AC outlet.
5