Preparing To Install - Inseego Wavemaker PRO Installation Manual

About the FW2010e
Description
The 5G Outdoor CPE FW2010e delivers multi-gigabit data rates over 5G millimeter
wave networks using high power phased array antenna modules. The FW2010e
provides extended range and coverage for millimeter wave cellular networks and
delivers data connectivity to existing in-building networks.
Durability
The FW2010e has an environmental rating of IP67 for water and dust ingress and can
operate within a temperature range of -30°C to 60°C (-22 to 140°F).

Preparing to Install

Tools and materials
• Installation handle
• Ladder
• Round 4.5mm to 6.5mm Cat6A PoE* cable (RJ45 fittings attached)
• Smartphone/device for Inseego Mobile App
• SIM card (4FF Nano)
• Phillips-head screwdriver
• M6 4mm hex driver
• Drill
• 14mm socket wrench/driver
• Ground wire
• Cat6A Ethernet cable
• Sealing/weatherproofing material
Your FW2010e package includes: FW2010e device, PoE injector, and SIM tool.
NOTE:
Mount installation packages are ordered and shipped separately.
*Power over Ethernet
2