Page 2
Download and install the Skyus Watcher connection manager. Run Skyus Watcher. (Optional) Install the Skyus DS mounting bracket. Connect the antennas. Connect the Skyus DS to the computer. (Optional) Activate any unactivated SIMs. (Optional) Install an alternative connection manager.
Page 3
APN. Drivers and Connection Manager To use the Skyus DS to connect to the internet, the host computer or device will need the correct drivers and a way to manage the connection. These are two separate items, both of which are required.
Compatible Versions The Skyus DS operates with Sierra Wireless drivers for Windows 7 and Windows 8 based platforms. Drivers Download the latest version of the drivers and step-by-step installation instructions from inseego.com/product/skyus-ds. Connection Manager You have a choice of connection management options: •...
Page 5
Connection Manager While some Linux builds may include drivers that will recognize the Skyus DS, the recommended and supported means is by using the available drivers and integrating the official SDK. The source code for the SDK is intended to be compiled directly on the Linux platform used.
Page 6
Ready or Active, the Skyus DS is working as expected. If the Meraki shows the modem as Connecting for more than 2-3 minutes, do the following: • Confirm with the carrier that the Skyus DS has an active line of service and what the correct APN is for the specific device. •...
Page 7
Q: How do I use the Skyus DS for GPS? A: With an appropriate antenna, the Skyus DS will obtain a GPS fix. To access the GPS data, a separate application is required on the host system to make use of the GPS data.
Need help?
Do you have a question about the Skyus DS and is the answer not in the manual?
Questions and answers