Advertisement
Advertisement
Table of Contents
Related Manuals for Inseego USB8
Summary of Contents for Inseego USB8
- Page 1 Meet your modem. GLOBAL MODEM USB8...
-
Page 2: About Your Modem
About your modem Test port Status Lights Foldaway, rotating USB connector SIM card Slot below cover Removable cover NOTE: Hardware and software are constantly evolving— the images and icons you see here are for reference only. -
Page 3: System Requirements
• USB Port 2.0 or higher • Wireless data plan • 4FF nano SIM card For information, refer to the USB8 User guide, found online at: go.inseego.com/USB8. CAUTION: Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt. -
Page 4: Installing The Sim Card
Installing the SIM card Follow these instructions to install your nano- SIM card: 1. Open the protective door by pressing on the cover with your thumb and sliding the door off. 2. Insert the new SIM card with the gold contacts facing down. - Page 5 Launch a browser and in the address bar enter http://my.usb or http://192.168.1.1. The Home page of the web UI appears: The web UI allows you to configure and manage your USB8. You can: • View system messages • Manage network, SIM, GPS, software update, and preference settings •...
-
Page 6: Connecting To The Internet
Connecting to the internet Your modem is set to automatically connect to the internet. Turn on your computer and insert the modem into a USB port. While the modem is starting up, the status LED slowly blinks green. When the status LED is solid green, the modem is connected to the internet. -
Page 7: Removing Your Modem
Removing your modem When it’s not in use, you can safely remove the USB modem by gently gripping it by the edges and pulling it out of the USB port. -
Page 8: Status Indicator Led
Status indicator LED When not connected: Color Status Description Green Blinking Modem powering up Solid No network available No SIM, SIM locked, SIM error When connected: Color Status Description Modem ready to use Solid Home network No data being transferred Green Home network available... -
Page 9: Resetting The Device
PIN protecting the SIM card http://my.usb/ Launch the web UI at and go to Settings > SIM. Resetting the device Caution: If you reset the device to factory settings, all of your custom settings will be lost. To reset the device to its original factory settings: http://my.usb/ 1. -
Page 10: Technical Support
Technical support Contact your service provider or reseller for customer service. More information Documentation for your USB8 is available online. Go to go.inseego.com/USB8. 2024 Inseego Corp. PN 90029527 R3...
Need help?
Do you have a question about the USB8 and is the answer not in the manual?
Questions and answers