Assembly; Preparation - Festo YJKP-NGS Operating Instruction

Assembly

6 Assembly
6.1

Preparation

Fitting space
The fitting space required for the product depends on the selected size of the Servo Press Kit and the
following factors:
– Stroke of the electric cylinder è www.festo.com/catalogue
– Attachment position and type of motor
Unintentional lowering of the piston rod is possible at any time. The axis cannot be pushed back
manually. If necessary, the electric cylinder may need to be dismantled.
Mounting surface
The mounting surface must exhibit the following characteristics:
– torsionally rigid
– free of stress
– sufficient strength to absorb the maximum forces
– sufficient evenness
6.2 Assembly
WARNING
Risk of injury due to lowering piston rod.
• Before working on the product: Secure the piston rod to prevent it from lowering.
CAUTION
Risk of injury due to falling product.
• Make sure the mounting surface is sufficiently strong to absorb the maximum forces.
• Only use the supplied mounting components.
• Secure the screw connections.
In the Servo Press Kit, the electric cylinder, axial or parallel kit and servo motor can be pre-assembled.
With individual components, the following assembly steps are required.
Assembling motor mounting kit
Depending on the configuration, an axial kit or parallel kit can be mounted.
8 Festo — YJKP-NGS/NGM — 2022-09