Clean and Maintain the Fixture
Clean the Fixture
CAUTION:
other than oil-free canned air.
Use oil-free canned air to clean the LED
•
emitters prior to installation and prior to
storage.
Use oil-free canned air to clean the fan
•
and fin stack as part of regular fixture
maintenance.
Store the Retrofit
When not installed on a fixture, store the
•
Source 4WRD LED in its original packaging or
in a dust-resistant plastic bag.
Store the Source 4WRD PAR or PARNel fixture
•
at temperatures of 5°C (41°F) or higher.
If you must store the fixture below 5°C (41°F),
•
make sure it is in an upright position as
shown to the right. Allow it to warm to room
temperature for a minimum of one hour
before applying power.
Source 4WRD Installation and User Manual
Do not touch or clean LED emitters with anything
Fan and
fin stack
Store fixture
facing up
11