Download
Share
Print this page
ETC Source 4WRD II Quick Manual
  1. Manuals
  2. Brands
  3. ETC Manuals
  4. DJ Equipment
  5. Source 4WRD II
  6. Quick manual

ETC Source 4WRD II Quick Manual

Version 1.1.2
Hide thumbs Also See for Source 4WRD II:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
ETC Quick Guide
Source 4WRD II Version 1.1.2
Introduction
The Source 4WRD II LED is a replacement for a standard Source Four burner
assembly. It converts the HPL source to a white-light LED and provides a
significant reduction in power consumption.
For complete information, download the Installation and User
Manual at etcconnect.com, or view online help on your
smartphone or tablet by scanning this code.
What's in the Box
Source 4WRD II retrofit
•
Threaded post (see
•
Safety
The Source 4WRD II fixture is intended for professional use only. Read the
entire manual before using this equipment.
WARNING:
•
•
•
•
•
•
Install the Source 4WRD II Retrofit on page 4
Note the following safety warnings before use:
Do not mount the fixture on or near a flammable surface.
Do not use this fixture with a damaged power lead. If the
power lead (cord set) is damaged, it must be replaced.
Mount and support the fixture only by the primary
suspension holes in the yoke.
Suspend the fixture from a suitable structure using only
hardware rated for the weight of the fixture.
In addition to primary suspension, attach a safety cable
(ETC Model 400SC or other approved safety cable or
device) to the fixture housing. An appropriate attachment
point (hole) is provided in the protruding tab on the fixture
housing.
Disconnect the unit from power and DMX and allow the
fixture to cool before removing or installing accessories,
and before all cleaning and maintenance.
Corpora te He a dqua rte rs Middleton, WI, USA +1 608 831 4116
London, UK +44 (0)20 8896 1000 Holzk irc he n, DE +49 (80 24) 47 00-0
Rome , IT +39 (06) 32 111 683 Hong Kong +852 2799 1220 P a ris, FR +33 1 4243 3535
We b
etcconnect.com
Conta c t
etcconnect.com/contactETC
Product information and specifications subject to change. ETC intends this document
to be provided in its entirety. Trademark and patent
7 0 6 7 M 1 3 3 0 -1 .1 .2 Rev A Released 2020-10
Support
support.etcconnect.com
© 2020 Electronic Theatre Controls, Inc.
info: etcconnect.com/ip
)

Advertisement

loading

Related Manuals for ETC Source 4WRD II

Summary of Contents for ETC Source 4WRD II

  • Page 1 Threaded post (see Install the Source 4WRD II Retrofit on page 4 • Safety The Source 4WRD II fixture is intended for professional use only. Read the entire manual before using this equipment. WARNING: Note the following safety warnings before use: Do not mount the fixture on or near a flammable surface.
  • Page 2 WARNING: Note the following safety warnings before use: The Source 4WRD II LED is not user serviceable. Field • modification of the Source 4WRD II LED will void your ETC warranty. Do not use the fixture below 5°C (41°F). •...
  • Page 3 LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION. Wire the Power Connector (If Needed) If you ordered a Source 4WRD II retrofit without a power connector, wire the connector in accordance with all national and local electrical codes: Brown = Live •...
  • Page 4 ETC Quick Guide Source 4WRD II Version 1.1.2 Install the Source 4WRD II Retrofit WARNING: RISK OF FIRE OR ELECTRIC SHOCK! Install this kit only onto luminaires that have the construction features and dimensions shown in the images in this document and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.

  • Page 5: Attach C-Clamp And Safety Cable

    Attach C-clamp and Safety Cable The C-clamp attaches the fixture to the mounting pipe and allows you to adjust the position of the mounted fixture. ETC recommends using 1.5 in schedule 40 pipe. 1. Tightly fasten the C-clamp to the yoke with the provided yoke bolt and lock washer.

  • Page 6: Connect Cables

    Configure the Fixture on the facing page WARNING: Do not use or store the Source 4WRD II fixture below 5°C (41°F). When the fixture has been stored or transported in cold temperatures, allow it to warm to room temperature for a minimum of 1 hour before applying power.
  • Page 7 • The fixture uses a single DMX channel for intensity control. • Line-dimming For the most current information on additional dimmer performance testing for both ETC and non-ETC dimmers, please visit the ETC website: https://support.etcconnect.com/ETC/Fixtures/Source_Four/Source_ 4WRD%2F%2FSource_4WRD_PAR/Dimmer_Settings_for_Use_with_Source_ 4WRD Configure the Fixture Up and down...

  • Page 8: Focus The Fixture

    ETC Quick Guide Source 4WRD II Version 1.1.2 Focus the Fixture Set the Z-adjustment Use the Z-adjustment knob located on the rear of the fixture to adjust the field of the LED light for specific applications. 1. Turn on the fixture and aim it at a flat surface.