Home/Test; Re-Home Fixture; Fixture Test - ETC 2510A1001 User's Operation Manual

Home/Test

Home / Test

Re-home Fixture

Fixture Test

Lens Cleaning Access
Re-home Fixture
Selecting and confirming this menu option re-homes all features except for pan and tilt.
Fixture Test
This menu provides options to test all features of the luminaire in one sequence, individual
features of the luminaire as stand-alone tests, or individual features of the luminaire
concurrently.
All menu options in Fixture Test are Off by default.
Note:
the test option again. Multiple tests can run at the same time with the exception of All
Test, which can only be run alone. "Running" is appended to the test name as a visual
indication of the current running tests.
All Test - All features of the luminaire are tested to their extents sequentially.
•
Tests run as follows: Pan/Tilt > Color > Gobo > Frost/Iris > Zoom/Focus > and then the
-
sequence repeats.
Color - All LEDs are tested to their extents.
•
Test run as follows: Red LED @ 100, Red LED @ 0, Green LED @100, Green LED @ 0,
-
Indigo LED @100, Indigo LED @ 0, Lime LED @ 100, and Lime LED @ 0.
Gobo - All gobos, both from the rotating gobo wheel and the Ani-gobo wheel, are tested
•
to their extents.
Test runs as follows: Rotating Gobo wheel snaps between gobo 1, gobo 2, gobo 3, gobo
-
4, and gobo 5 > gobo 3 rotates counter-clockwise fast > gobo 3 rotates clockwise fast >
returns to open position > the Ani-gobo wheel rotates clockwise at half speed > counter-
clockwise at fast speed > returns to the open position.
Frost/Iris - The frost and iris are tested to their extents.
•
Test runs as follows: Frost from full open to full closed in three seconds > full closed to
-
full open in three seconds > full open to full closed in zero seconds > waits one second >
closed to full open in zero seconds > waits one second > Iris pulses medium speed for
three seconds.
Zoom/Focus - The zoom and focus lenses are tested to their extents.
•
Test runs as follows: Zoom and focus lenses move from 0% to 100% > then from 100%
-
to 0%.
Pan/Tilt - Pan and tilt are tested to their extents.
•
Test runs as follows: Pan and tilt @ 0% > pan @ 100% > pan @ 0% > Pan @ 100% >
-
pan @ 0% > tilt @ 100% > tilt @ 0% > tilt @ 100% > tilt @ 0% > pan @ 50% > tilt @
25%.
Menu System
>
>
>
Each test will repeat its sequence until you exit the Fixture Test menu or select
31