Connect To The Steering Wheel Encoder - Raven SmarTrax Installation Manual

•
The node mounting location must not create tripping hazards.
•
Mount the node in a location where it will not be kicked or jarred during normal equipment operation.
•
The location must allow cable routing to avoid crimping or damaging the cables or the node connections.
•
Securely fasten the node using bolts or screws through at least two of the three mounting holes. When
mounted properly, the node should not become loose or rotate.

Connect to the Steering Wheel Encoder

Steering Column Shroud Removed
FIGURE 4.
Remove the shroud surrounding the steering column.
1.
Encoder Connections
FIGURE 5.
Locate and disconnect the machine's two encoder connections.
2.
Manual No. 016-5034-001 Rev. A
Cab Component Installation
11