Table of Contents
Advertisement
Insert
Twisted Pair Wires
Ethernet
RJ-45
Connector
Pins:
8
7
6
5
4
3
2
1
Rear
Panel
IPL EXP 200
IPL EXP RIO8
or
Activity
LAN/PoE
LED
LAN / PoE+
MAC address — Each IPL EXP unit is assigned a unique
user hardware ID number (Media Access Control [MAC]
address) (for example, 00-05-A6-05-1C-A0). You may need
this address during control processor configuration.
A label that indicates the MAC address is located on the rear
or side panel of each EXP unit.
Cabling:
•
For 10Base-T (10 Mbps) networks, use a CAT 3 or better cable.
For 100Base-T (max. 155 Mbps) networks, use a CAT 5 or better cable.
•
Connect the PC that you will use for setup, the LAN port of the EXP , and the control
processor and touchpanels to the same Ethernet network.
TCP/IP
PC
Network
Default protocol, public ports:
• IPL EXP IP address: 192.168.254.250
• Gateway IP address: 0.0.0.0
• Subnet mask: 255.255.255.0
• DNS address: 127.0.0.1
• DHCP client: off
• Link speed and duplex level: autodetected
• Data rates: 10/100Base-T
Link
LED
PoE or PoE+
• Connect to a network that
provides PoE+
(IPL EXP RIO8) or PoE or
PoE+ (all other models) or to
an active power injector.
• Front panel LED (
) blinks
during boot-up and remains
lit when the unit is powered
and operational.
Figure 8.
LAN Connector, LEDs, and Default Protocol
IPL EXP I/O Series • Hardware Features and Installation
LAN (Ethernet)
Default login
credentials:
• Username:
admin or
user
• Password:
extron
Front Panel,
IPL EXP RIO8
R
Front Panel,
IPL EXP RIO8
IPL EXP RIO8
100 Mbps
Connection
100
Network is
LINK
active.
ACT
Data is being
sent/received.
00-05-A6-XX-XX-XX
MAC: 00-05-A6-XX-XX-XX
S/N: ####### E######
MAC
Address
MAC: 00-05-A6-XX-XX-XX
S/N: ####### E######
19
Advertisement
Table of Contents
