Replacing The Ribbon - Dascom DC-2300 User Manual

2.2 Replacing the Ribbon

Change the ribbon when the OLED Display prompts [RIBBON END] message.
Approved Ribbons for this printer:
Type
1/2(YMC)KO
ribbon
YMCKO
ribbon(500)
K ribbon
Please contact your local Reseller for ribbons not listed above.
Direct touching contaminates the Ribbon and causes uneven print

quality.
Avoid excessive impact on the Ribbon when replacing them.

Using non-genuine products may cause poor print quality and Printer

malfunction.
Quality and reliability of the non-genuine products are not guaranteed.

Even within the warranty period, fees may be charged on servicing the

printer using non-genuine products.
You can get the unused quantity of ribbon.
Refer Section 3.3 to get the unused amount of your ribbon.
Via the OLED Panel or through the Printers Driver, an estimation of the remaining Ribbon quantity
can be viewed if it is sufficient for your current print job. The OLED displays the [RIBBON END]
warning when ribbon is close to running out.
DC-2300
Description
yellow, magenta, cyan,
black, transparent
yellow, magenta, cyan,
black, transparent
black
Product Code
DUS PO:75046007
PO:75046008
DAP
PO:75046009
DEU
DUS PO:75046004
PO:75046005
DAP
PO:75046006
DEU
DUS PO:75046010
PO:75046011
DAP
PO:75046012
DEU
24
User Manual v1.0