Replacing The Ribbon - Dascom DC-3300 User Manual

2.2 Replacing the Ribbon

Change the ribbon when the LCD prompts [RIBBON END] message.
Approved ribbons for this printer:
Type
YMCK ribbon
YMCKK ribbon
YMCKO ribbon
YMCKOK ribbon
K ribbon
Please contact your local reseller for ribbons not listed above.
Direct touching contaminates the ribbon and causes uneven print

quality.
Avoid excessive impact on the ribbon when replacingthem.

Using non-genuine products may cause poor print quality and printer

malfunction.
Quality and reliability of the non-genuine products are not guaranteed.

Even within the warranty period, fees may be charged on servicing the

printer using non-genuineproducts.
You can get the unused quantity of ribbon.
Refer Section 3.3 to get the unused amount of your ribbon.
Via the LCD Panel or through the Printers Driver, an estimation of the remaining Ribbon quantity can
be viewed if it is sufficient for your current print job. The LCD displays the [RIBBON END] warning
when ribbon is close to running out.
Consume the ribbon as soon as possible after purchase
DC-3300
Description
/
/
yellow, magenta, cyan,
black, transparent
/
black
Product Code
/
/
PN:
27056003 (DUS)
27056004 (DEU)
27056005 (DAP)
/
PN:
27056006 (DUS)
27056007 (DEU)
27056008 (DAP)
.
25
User Manual v1.0