Accessories - ELGO Electronic EMAX2 Series Operation Manual

12 Accessories

Magnetic tape AB20-50-20-2-R-11: Art. No.: 731000110
Technical Data
Operating temperature - 20° up to + 85 °C
Stock temperature - 40° up to + 95 °C
Thermal expansion ΔL
Linear expansion coefficient α 16 x 10
Bending radius minimal 150 mm
Protection class IP65
Max. available lengths 10 m (for option EMAL: 20 m) minimum length 0.2 m
Basic pole length 5 mm
Amount of tracks (absolute) 2
Influence of external magnetic
Radius of curvature min. 150 mm
Magnetic tape length 0.15 m corresponds to the effective measuring length
Guiding wagon FW2080: Art. No.: 734LF0003
Guiding rail FS-1000 (1 m) / FS1500 (1.5 m) / FS-2000 (2 m) for EMAX with FW2080:
possible rail length: 1 m, 1.5 m or 2 m,
measures: length (according to the order) x width (25 mm) x height (6 mm)
for length > 2m please order several guiding rails in the desired measuring length (up to a
maximum of 10m)
example: 5 guiding rails can be stringed together, to reach the maximal possible measuring length
of 10 meters. The magnetic tape is glue on completely onto the guiding rails which are stringed
together.
AB20-50-20-2-R-11 guided option, please order the desired length. The magnetic tape is stuck
completely onto the guiding rails which are stringed together.
SSI/Profibus converter PNO1:
Interface converter from SSI to Profibus DP
Humidity max 80 % (non-condensing)
α
ΔL = L x
(L = measuring length in meter)
ϑ
(Δ = relative temperature change)
depending on 20° room temperature in °K
–6
1/K
Width 20 mm +/- 0.3 mm
Thickness 1.8 mm +/- 0.1 mm (magnetic tape R)
External magnetic fields are not allowed to exceed 64 mT (640 Oe;
fields 52kA/m) at the magnetic tape surface, because it can destroy and damage
the magnetic tape code. Magnetic fields > 1 mT at the measuring system
have an impact to the system accuracy.
ϑ
x Δ
29
Accessories