Product Parts; Preparing The Carriage For Use; Welding Machine Connections - Kemppi MagTrac F 61 Manual

1.5

Product parts

Front view
5.
9.
EN
1. Control panel
2. Control knob for scrolling and selecting values
3. Welding gun fixing mechanism
4. Approximate adjustment handles
5. Fine adjustment screws
6. Hex screws for adjusting the guide roller arms
7. Handle for lifting the device and disabling the magnet.
8. Limit switch detects the end of the weld and stops the carriage automatically
9. Wheels
2.

PREPARING THE CARRIAGE FOR USE

2.1

Welding machine connections

To use the MagTrac F 61, you need a FastMig power source, wire feeder, and a shielding gas
cylinder or other source of shielding gas appropriate for your welding task.
4
MagTrac F 61
Side view
1. 2.
8.
7.
4.
3.
6.