Table of Contents
Advertisement
Wide range of adjustments
MagTrac F 61 offers a wide range of adjustments. For example, you can turn the guide roller
arms 180° to point outwards if you need to improve visibility to the welding arc, or you can
swing the welding gun over the side (see the picture).
The limit switch might not work if you change the position of the roller arms or welding gun
NOTE!
mechanism. This may prevent the carriage from stopping automatically in the end of the weld.
EN
Activating and releasing magnet
When you lift the handle to its up position in order to move the device, the magnet is
automatically inactivated.
When you place the device to its welding position, you just push the handle down, and the
magnet is automatically activated.
Magnet activated
Magnet inactivated
8
MagTrac F 61
Advertisement
Table of Contents
