The Call Recorder Pri; What's In The Box; Connecting The Power Supply; Connecting The Line - Vidicode PRI Manual

2 The Call Recorder PRI

2.1 What's in the box

The following parts are supplied with your Call Recorder PRI:
Mains cable (not available for Switzerland and Australia)

ISDN cable with two RJ45 connectors

Brackets and screws for 19inch rack mounting

This manual

On all models that have the CD drive option installed:
A CD with Call Recorder Quick CD Access software

A recordable CD


2.2 Connecting the Power supply

Use the supplied mains cable. The recorder does not have an On/Off switch; the
Call Recorder ISDN is turned on by connecting the power supply.
In some countries (Switzerland, Australia) no mains cable is supplied because it
cannot be bought in the country of manufacture (The Netherlands). Any standard
computer mains cable will do.

2.3 Connecting the line

The Call Recorder PRI is connected in series to the E1 ISDN line between the line
port and other equipment. With the Call Recorder PRI you have received a cable
with two RJ45 connectors. This cable is used to connect the Call Recorder PRI to the
wall socket. The existing cable can be used to connect the Call Recorder PRI to the
PBX as is shown in the figure below.
14 Call Recorder PRI manual © 2009-2019 Vidicode®