Table of Contents
Advertisement
2 The Call Recorder PRI
2.1 What's in the box
The following parts are supplied with your Call Recorder PRI:
Mains cable (not available for Switzerland and Australia)
•
ISDN cable with two RJ45 connectors
•
Brackets and screws for 19inch rack mounting
•
This manual
•
On all models that have the CD drive option installed:
A CD with Call Recorder Quick CD Access software
•
A recordable CD
•
2.2 Connecting the Power supply
Use the supplied mains cable. The recorder does not have an On/Off
switch; the Call Recorder ISDN is turned on by connecting the power
supply.
In some countries (Switzerland, Australia) no mains cable is supplied
because it cannot be bought in the country of manufacture (The
Netherlands). Any standard computer mains cable will do.
2.3 Connecting the line
The Call Recorder PRI is connected in series to the E1 ISDN line between
the line port and other equipment. With the Call Recorder PRI you have
received a cable with two RJ45 connectors. This cable is used to connect
the Call Recorder PRI to the wall socket. The existing cable can be used
to connect the Call Recorder PRI to the PBX as is shown in the figure
below.
14
Call Recorder PRI manual © 2009-2014 Vidicode®
Advertisement
Table of Contents
