Gateway 200ARC Network Manual page 68

Wireless Ethernet Networking
6
Type a name for your workgroup in the
name of up to 15 characters with no blank spaces. The workgroup name
must be the same for all computers in your network workgroup, and the
name must be different than any computer name on your network.
7
Click
8
Click
9
Click
the TCP/IP protocol" on page
Important
62
to close the Identification Changes dialog box.
OK
to close the System Identification dialog box.
OK
to close the System Identification dialog box. Go to
OK
You must give each computer on the network a unique
Computer Name and the same Workgroup Name.
www.gateway.com
Workgroup
63.
box. Use a workgroup
"Configuring