Setting Up A Peer-To-Peer Wired Ethernet Network - Gateway 200ARC Network Manual

Wired Ethernet Networking
Setting up a peer-to-peer wired Ethernet
network
Setting up a peer-to-peer network requires only two computers, with wired
Ethernet available on each computer, and a single crossover cable. Use this type
of network if you are setting up a temporary network to transfer files from one
computer to another.
To set up a peer-to-peer network:
■ Connect the ends of a network crossover cable to the network ports on
both of the computers.
22
Crossover cable
www.gateway.com