Naming The Computers And The Workgroup; Naming The Computers And The Workgroup In Windows Xp - Gateway 200ARC Network Manual

Wired Ethernet Networking
Naming the computers and the
workgroup
Each computer on your network must have a unique name and be identified
as part of a workgroup. This must be done individually on each computer.
To name your computers in Windows XP, go to
the workgroup in Windows XP" on page
To name your computers in Windows 2000, go to
the workgroup in Windows 2000" on page
Naming the computers and the workgroup in
Windows XP
Use the Windows XP Network Setup Wizard to name each computer and
workgroup as well as select other network settings in Windows XP.
Important
30
The network setup procedure uses the Windows XP
Network Setup Wizard. The example screens show those
screens that typically appear in the course of using the
wizard. If your network situation differs from that used in
this example, you may encounter additional screens or
screens with different selections. Make sure that you read
each screen in the wizard and make your selections based
on your particular network situation.
www.gateway.com
"Naming the computers and
30.
"Naming the computers and
38.