Gateway 200ARC Network Manual page 102

Wireless Ethernet Networking
11
Click the type of power management you want to use.
12
Click
13
Click the check box if you are using this computer on more than one
network. This will force the computer to renew the TCP/IP address each
time you change profiles.
14
Click
15
Now that your ORiNOCO profile is set up, go to
point network using the ORiNOCO Client Manager" on page
Connecting to an access point network using the ORiNOCO Client
Manager
To connect to a wireless Ethernet network using the ORiNOCO Client
Manager:
1
Right-click the ORiNOCO Client Manager icon
2
Click
to access.
96
. The TCP/IP Behavior screen opens.
Next
to close the Edit Configuration wizard.
Finish
, then click the profile for the network you want
Configuration Profile
www.gateway.com
"Connecting to an access
96.
on the taskbar.