Configuring Computer Settings For An Access Point - Gateway 200ARC Network Manual

Configuring computer settings for an access
point
If you are unable to connect to an access point in the
the most likely cause is that the access point is using WEP security. You need
to configure your network settings to use the same WEP security settings as
those used by the access point.
To configure computer settings for an access point wireless Ethernet
network in Windows XP:
1
With the Connect to Wireless Network dialog box open, click the network
you want to configure your computer for, then click
Network Connection Properties dialog box opens.
2
Click the tab.
Wireless Networks
www.gateway.com
Creating a Wireless Access Point Network
Available networks
Advanced
list,
. The Wireless
77