Wireless Ethernet Networking
■
11
Click
12
If you temporarily connected a computer to the access point router in
Step
13
Reset the power on your cable or DSL modem.
14
Restart all of your computers on the network.
To connect to an access point in Windows XP, see
point network in Windows XP" on page
To connect to an access point in Windows 2000, see
point network in Windows 2000" on page
74
WAN Connection Type
each time you log on, click
ISP requires a fixed IP address, click
provided by your ISP.
, then click
Apply
Continue
6, disconnect it.
www.gateway.com
- If your ISP assigns you a different IP address
Obtain an IP Address Automatically
Static IP
to save the settings.
75.
81.
. If your
, then enter the values
"Connecting to an access
"Connecting to an access