Gateway 200ARC Network Manual page 50

Wired Ethernet Networking
Entering the IP address and subnet mask in Windows 2000
To enter the IP address and the subnet mask:
1
Click
and Dial-up Connections window opens. This window has an icon for each
networking connection available on your computer. For example, if you
have both wired and wireless Ethernet hardware installed on your
computer, there will be two icons, one for your wired Ethernet hardware
and one for your wireless Ethernet hardware.
2
Right-click the
then click
3
Click to select the
checked are used by this connection
scroll bar to see more choices.
44
, , then click
Start Settings
Local Area Connection
. The Local Area Connection Properties dialog box opens.
Properties
Internet Protocol (TCP/IP)
www.gateway.com
Network and Dial-up Connections
icon for the wired Ethernet hardware,
check box in the
list. If you do not see TCP/IP, drag the
. The Network
Components