Wireless Ethernet Networking
6
After you have completed setting up your access point network in
Windows 2000, go to
Adding an access point using the Broadcom Wireless Configuration
Utility
If an access point does not appear in the
the access point is turned on, you need to add it manually. This typically
happens when you set the access point's
. For more information, see
No
To manually add an access point wireless Ethernet network using the
Broadcom Wireless Configuration Utility:
1
With the Connect to Wireless Network dialog box open, click
Broadcom Wireless Configuration Utility opens.
2
Click
3
Type the name of the network in the
84
"Where to go from here" on page
. The Wireless Network Properties dialog box opens.
Add
www.gateway.com
Available networks
Allow Broadcast SSID to associate
"Configuring the access point" on page
Network name (SSID)
97.
list, and you know
to
72.
. The
Advanced
box.