Gateway 200ARC Network Manual page 45

6
Type a name for your workgroup in the
name of up to 15 characters with no blank spaces. The workgroup name
must be the same for all computers in your network workgroup, and the
name must be different than any computer name on your network.
7
Click to close the Identification Changes dialog box.
OK
8
Click to close the System Identification dialog box. Go to
OK
the TCP/IP protocol" on page
Important You must give each computer on the network a unique
Computer Name and the same Workgroup Name.
Configuring Windows for a Wired Network
Workgroup
40.
www.gateway.com
box. Use a workgroup
"Configuring
39